A107
For sealing gaps and joints to prevent the passage of air
- Composed of an extruded tape, laminated with a non-woven fabric
- Ensures airtight when double-sided butyl tape is not suitable.
- Versatile use in the construction.
- Improving insulation and energy efficiency in construction projects.
DESCRIPTION OF BUTYL TAPES
A107 FLEECE is a butyl tape laminated with a non-woven polyester fleece.
Versatile butyl tapes provide strong, waterproof seals for various applications, ensuring durability and reliability.
KEY FEATURES
- Good adhesion to a wide range of substrates.
- The product is highly conformable.
- The fleece will accept paint, plaster, cement and adhesives.
- Remains flexible throughout its service life.
- Easy and accurate to use with little waste and no mess.
USES
- For sealing floor-to-wall joints and around drains in wet rooms.
- For sound-deadening applications.
- For sealing cracks prior to plastering.
- For applications to prevent air-leakage.
PERFORMANCE
| PROPERTIES | UNIT | SPECIFICATION | TEST METHOD |
|---|---|---|---|
| Appearance | - | Roll form | TT - 01 |
| Colour | - | Grey | TT - 02 |
| Odour | - | No odour | TT - 03 |
| Specific gravity at 30ºC | ºC | 1.60 -1.80 | TT - 05 |
| Dynamic Shear Adhesion | N/cm2 | 12 | TT - 31 |
| Nonvolatile content at 105 ºC for 3hrs | % | Min 99 | TT - 09 |
| 90° Peel Adhesion | N/cm | Max 0.5 | TT - 11 |
| 180° Peel Adhesion | N/cm | 9 | TT - 32 |
| Service Temperature Range | - | No surface crack & adhesion loss | -- |
| Service temperature | °C | -40 to 90 ºC | TT - 33 |
TT- TALON TEST METHOD
APPLICATION
- Application temperature range: 5 to 40 ºC
- Storage conditions: Store in cool and dry place at the original packing (Flat position always)
- Self-life: 24months
INSTRUCTION
- Surface preparation: All surfaces should be clean, dry, and free from frost, grease, and loose materials. When cleaning contaminated substrates, our recommend that propan-2-ol (IPA) is used and allowed to dry prior to the application of the butyl tape.
-
Application: Remove the release paper and apply the tape to the substrates to be joined. Take care to avoid rucks
in the tape. Roll the tape with a small roller to ensure good adhesion along the whole length of the tape
STD PACKING
Rectangular Section:
Thickness X Width X Length
1mm x90mmx 10m
1mm x200mmx 10m
TOLERANCES
Rectangular Section:
Thickness: ± 10%
Width: up to 100mm- ± 2mm
Over 100mm : ± 3mm
RELATED PRODUCTS
A-890
Segment - Construction
A-899
Segment - Construction